DimasTech® Bench/Test Table EasyHard Dual V2.5 Custom Colour

Code: BT071
DimasTech® Bench/Test Table EasyHard Dual V2.5 Custom ColourDimasTech® Bench/Test Table EasyHard Dual V2.5 Custom ColourDimasTech® Bench/Test Table EasyHard Dual V2.5 Custom ColourDimasTech® Bench/Test Table EasyHard Dual V2.5 Custom ColourDimasTech® Bench/Test Table EasyHard Dual V2.5 Custom Colour
Price 214.19 $ Out of production Request information

Share

Features

Finally after a long absence from the market of our products by Bench Table by which we pioneered in 2007, returns to the square from the Bench/Test Table EasyHard in version V2.5.


This new product is born again after having collected a lot of feedback from the customers and even more experienced user "novice" who always helps us to improve our products. Below you will find the salient features of the new Bench/Test Table EasyHard V2.5.


This particular case and dedicated mainly to the user who is not content than normal houses, but he wants something more, that functionality that all users are addicted to the "frequent changes of constituents needs”.


The " Bench/Test Table EasyHard V2.5" can be used both as a station to test, whether as a regular holiday for everyday use, or for those expositions in which the viewer wants to understand what components are being used and present the hardware more attractive than usual brothels, which has little room to see the impassioned components used.


The Bench/Test Table Easy/Hard V2.5 offers more support and compatibility with products certified for liquid cooling, and all the hardware in circulation. Compared to the previous version are available a PSU support, and support for pump + tank (optional) native to the integration of liquid cooling.


The Bench/Test Table Easy/Hard V2.5 has also included a special support for the attachment of Pot (see category: Extreme Cooling Section Pot), with a bow and threaded rod, this system allows you to set a Pot, or any sink without the use of clips or brackets, in any position on the motherboard.


This new version support the installation of two radiators and offers the customer particular predisposition for all types of radiators on the market: 

  • HwLab,
  • Thermochill,
  • TFC
  • Etc ...


As tradition DimasTech is available to make the product even more unique through a custom colour requested by the customer:

  • Custom colours (see DimasTech colour list)


To meet the need of rapid disassembly of the components from the Bench/Test Table Easy V2.5 has available new Thumbscrew, to fix any part of the banquet itself or hardware or support for expansion cards.


Section Bench/Test Table, category Accessories, you will find the complete list of accessories available in the catalogue.


Dimensions:

  • 455mm depth x 440mm width x 210mm height (height considering the pins and do not consider the spacers supporting motherboard, 25mm)


Colour Bench/Test Table:

  • Custom (Specify in order notes the colour desired)


Colour Supports:

  • Graphite Black Standard (if not specified in the order the custom colour media will be supplied as Graphite black)


Technical Specifications DimasTech Bench/Test Table Easy V2.5: 

  • Table made sheet of 1,5 mm,
  • CNC Laser Cutting,
  • Powder or Enamel, basic phosphatic
  • Totally "Made in Italy"
  • Written "Made in Italy" on the back of the Bench/Test Table
  • Compatible with ATX and Full ATX motherboard and Micro ATX, XL-ATX, Mini ATX
  •  Installation of up to 3 devices 5.25 inches
  • Installation of up to 3 hard drives (3.5 inch) 4 or more floppy disks with no floppy drive,
  • Support for ventilation fan socket area 120x120,
  • Support for ventilation area before the video card fan 120x120
  • Brand new buttons wired for power and reset switches, (n ° 2)
  • Holes on the front and back of the motherboard to allow the passage of cables and pipes for watercooling downstairs
  • Support for feeders positioned on the front or back of the Bench/Test Table
  • Compatible with power supplies up to 22cm in length,
  • Support for lateral installation of all types of radiators on the market (HwLab, Thermochill, TFC, Etc)
  • Rear space for installation of a compact liquid cooling system,
  • Thumb Screws step M3 and 6-32 (American pitch UNC)
  • Support for 120x120 mm fan for cooling systems in SLI/Crossfire
  • Rubber feet Support Ram fan 120x120 mm
  • Lower tray with sliding tracks and fixation with screws knurled side
  • Placement supported devices on slots
  • Personalization side of the body with the basic version of the Bench/Test Table
  • Positioning devices adjustable supports
  • Supports for adjustable radiator over the back of the Bench/Test Table
  • Screws Knurled for nuts
  • Total elimination of the use of instrumentation outside the Bench/Test Table
  • Full compatible for mounting of earlier versions of media and Bench/Test Table Hard V1.0 and V2.0
  • Full compatibility with the new Bench/Test Table Hard V2.5
  • Prepared for 4 passes for watercooling pipes or fittings on the back of the motherboard
  • Possibility assembly front USB port (DimasTech USB Cable is available as an accessory - see section Accessories)


Technical Specifications DimasTech Bench/Test Table Hard V2.5: 

  • Table made sheet of 1,5 mm,
  • CNC Laser Cutting,
  • Powder or Enamel, basic phosphatic
  • Totally "Made in Italy"
  • Compatible with ATX and Full ATX motherboard and Micro ATX, XL-ATX, Mini ATX
  • Support for ventilation fan socket area 120x120,
  • Support for ventilation area before the video card fan 120x120,
  • New front slits on the motherboard to allow the passage of cables and pipes for watercooling,
  • Handles ABS plastic
  • Arch made with pickled sheet thickness 6mm
  • Threaded rod M6 to capture Pot or sinks of various kinds,
  • Special bolt that can slide on the track of the arch, and capable of blocking both the threaded rod bolt that the same arch, with a simple nut butterfly
  • Scrolling arc along the surface of the motherboard, for full compatibility with all motherboards in circulation and future
  • Ability to use Pot up to 30 cm high
  • Compatibility with the new Bench/Test Table Easy V2.5,
  • Can be mounted "on top" of the new Bench/Test Table Easy V2.5 without hindering the pipes of the cooling liquid
  • VGA support and add-on cards included
  • Tool Free
  • Possibility of customizing Nick Name Clocker (specify in order notes-Additional cost € 10,00)


Contents of Package:

  • DimasTech Bench/Test Table Easy V2.5,
  • DimasTech Bench/Test Table Hard V2.5,
  • 1 kit with screws for hardware,
  • Arch
  • Auction with knurled knob
  • 1 kit with screws for fixing thumb screws + card support for expansion
  • 12 spacers for the motherboard,
  • Two adhesive DimasTech


Time to fulfill your order:

  • Usually ships within 6/7 working days


Reviews: